. .
  1. #1
    Hey guys, hoping you can help me here. I've been looking to start CAD'ing up the parts I think I will require in my build so I can then fiddle about with them in a nice assembly. Trouble is, I can't seem to find the dimensions of the first part I'm looking at doing . It's the runners here: fl15ca-z0 either FL15CA or FL20CA would be good to get me started. Orrrrr, am I looking at the wrong type of runner and there is a really common one everybody uses that I've missed?

    I did try the search button but couldn't see anything for those part numbers.

    Cheers!

  2. #2
    Are the dimensions further down on the zapp page you linked to no good?

    FL15; 47W, 56.2L, 24H
    FL20; 60, 70.5, 30 (mm)

  3. The Following User Says Thank You to mocha For This Useful Post:


  4. #3
    Ah, so a FL15CA is the same as a CB?

    Oh dear I've been staring at it all along
    Just... One more project...


  5. #4
    :-)

    Looks like the only difference with CA / CB is top or bottom fix (mounting?).

    PM sent.
    Last edited by mocha; 24-02-2013 at 01:44 PM.

  6. #5
    Thanks :)

    PM received, digesting it now. Thanks once again!
    Just... One more project...


  7. #6
    CA, CB specifies if the blocks have flanges, so can be mounted from both sides, or no flanges in which case you're limited to one side. Also you can get bearings like those cheaper on Aliexpress, among other places.
    Last edited by Jonathan; 24-02-2013 at 06:20 PM.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  8. The Following User Says Thank You to Jonathan For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CNC machine cutting incorrect dimensions
    By Clem in forum Machine Discussion
    Replies: 13
    Last Post: 26-02-2014, 10:00 PM
  2. Effect of Forces on Gantry Cross-Sections?
    By WandrinAndy in forum Gantry/Router Machines & Building
    Replies: 37
    Last Post: 22-12-2012, 10:34 PM
  3. BK12 Hole Spacing Dimensions On Top
    By Hobgoblin in forum Lead Screws, Nuts & Supports
    Replies: 2
    Last Post: 21-09-2012, 10:31 PM
  4. Dimensions and Weight of Denford Starmill PC Please
    By cristec in forum Milling Machines, Builds & Conversions
    Replies: 4
    Last Post: 13-08-2012, 07:02 AM
  5. spindle cross section view
    By routercnc in forum Tool & Tooling Technology
    Replies: 20
    Last Post: 05-08-2011, 12:55 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •