Spindle: 1 Me: 0
It's a pita because you must fabricate your tools, and even they easily breaks (only 2.5mm pins...). You must heat at least 3 minutes in full power with your heater before trying unscrew this "#&@% full of holes". I enlarged them to 5mm,. But after this first victory, there's another flange. End of the story for me.
Click image for larger version. 

Name:	20200215_090829_copy.jpg 
Views:	11 
Size:	77.6 KB 
ID:	27398
Click image for larger version. 

Name:	20200215_090841_copy.jpg 
Views:	10 
Size:	90.1 KB 
ID:	27399
Click image for larger version. 

Name:	20200213_151658_copy.jpg 
Views:	10 
Size:	144.0 KB 
ID:	27400
Click image for larger version. 

Name:	20200213_150153_copy.jpg 
Views:	11 
Size:	88.2 KB 
ID:	27401
Click image for larger version. 

Name:	20200213_150111_copy.jpg 
Views:	10 
Size:	128.0 KB 
ID:	27402Click image for larger version. 

Name:	20200215_091951_copy.jpg 
Views:	10 
Size:	122.8 KB 
ID:	27403
The 6002 bearing must have the large side pointed to the top. It's not a radial bearing.