1. #1
    hoezap's Avatar
    Lives in London, United Kingdom. Last Activity: 2 Weeks Ago Has been a member for 5-6 years. Has a total post count of 96. Received thanks 4 times, giving thanks to others 1 times.
    Hello



    Thank you for entering in my post


    I am totally new about Mazak Milling Machines

    On the the top of the control pannel is written Mazatrol 640M, so i thought the machine works with this software with G-codes instead making some search i realised that there is a difference between Mazatrol and G-codes so probably thi Mazak machine doesn't use a Mazatrol software as it is witten on the top of the control pannel but a Fanuc software, Is it right?

    any information according this matter will be very appreciated

    Thank you in advance for your help

  2. The Following User Says Thank You to hoezap For This Useful Post:


  3. #2
    hoezap's Avatar
    Lives in London, United Kingdom. Last Activity: 2 Weeks Ago Has been a member for 5-6 years. Has a total post count of 96. Received thanks 4 times, giving thanks to others 1 times.
    Quote Originally Posted by Ajancnc View Post
    Mazatrol is totally different from G-code. Mazatrol is conversational programming software which built into the machine. Compare to Mazatrol, G-code is not that much of good for quick features like simple line machining and bolt patterns.

    Thank you very much Ajancnc

  4. The Following User Says Thank You to hoezap For This Useful Post:


  5. #3
    Mazatrol is totally different from G-code. Mazatrol is conversational programming software which built into the machine. Compare to Mazatrol, G-code is not that much of good for quick features like simple line machining and bolt patterns.

  6. The Following User Says Thank You to Ajancnc For This Useful Post:


  7. #4
    hoezap's Avatar
    Lives in London, United Kingdom. Last Activity: 2 Weeks Ago Has been a member for 5-6 years. Has a total post count of 96. Received thanks 4 times, giving thanks to others 1 times.
    Quote Originally Posted by Ajancnc View Post
    Mazatrol is totally different from G-code. Mazatrol is conversational programming software which built into the machine. Compare to Mazatrol, G-code is not that much of good for quick features like simple line machining and bolt patterns.

    Thank you very much Ajancnc

  8. The Following User Says Thank You to hoezap For This Useful Post:


  9. #5
    hoezap
    You can use mazatrol and G codes within the same program.

  10. The Following User Says Thank You to Peter Griffin For This Useful Post:


Similar Threads

  1. G codes
    By ptjw7uk in forum Programmers Corner
    Replies: 3
    Last Post: 23-09-2013, 03:10 AM
  2. Look for Mazatrol software like iTNC530
    By hoezap in forum Mazak, Yamazaki Machines
    Replies: 2
    Last Post: 08-03-2013, 12:07 AM
  3. Difference between these two motors?
    By Rogue in forum Stepper & Servo Motors
    Replies: 8
    Last Post: 29-10-2012, 08:58 PM
  4. Difference between controllers and Cad/Cam programming???
    By 0625272 in forum Computer Software
    Replies: 0
    Last Post: 23-06-2011, 08:40 PM
  5. Stepper Motor Wire Colour Codes
    By c cunningham in forum Stepper & Servo Motors
    Replies: 14
    Last Post: 26-01-2011, 02:13 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •