Thread: Richard from Maidenhead
-
31-03-2013 #1
Hello everybody.
I've been following this forum for a while and decided to join up.
I have recently completed my first build - a 50x80cm CNC machine that I intend to use mainly for hobby woodwork and occasionally aluminium. I need to replace the chipboard z-axis and tidy up the electronics, but its up and running.
I'm hoping to learn lots from the experienced members of this forum.
-
31-03-2013 #2
Hi Rich, wellcome to the forum.I'm sure the experts will have plenty of advice. Nice to see a fixed gantry, but I guess the 500x800mm is the footprint and not the working area. good luck. G.
-
31-03-2013 #3
welcome Rich good to see you are on your way. Well done.
If the nagging gets really bad......Get a bigger shed:naughty:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Hello from Maidenhead
By deepjoy in forum New Member IntroductionsReplies: 1Last Post: 30-09-2010, 03:18 PM -
NEW MEMBER: Richard from South Wales
By RLMTS in forum New Member IntroductionsReplies: 2Last Post: 22-01-2008, 04:59 AM
Bookmarks