1. #1
    Hello everybody.

    I've been following this forum for a while and decided to join up.

    I have recently completed my first build - a 50x80cm CNC machine that I intend to use mainly for hobby woodwork and occasionally aluminium. I need to replace the chipboard z-axis and tidy up the electronics, but its up and running.

    I'm hoping to learn lots from the experienced members of this forum.

    Click image for larger version. 

Name:	64119_10151369298205748_1649440668_n.jpg 
Views:	95 
Size:	115.8 KB 
ID:	8586Click image for larger version. 

Name:	484828_10151369298275748_568999958_n.jpg 
Views:	100 
Size:	92.0 KB 
ID:	8587Click image for larger version. 

Name:	487646_10151369298235748_1046606440_n.jpg 
Views:	104 
Size:	129.4 KB 
ID:	8588

  2. #2
    Hi Rich, wellcome to the forum.I'm sure the experts will have plenty of advice. Nice to see a fixed gantry, but I guess the 500x800mm is the footprint and not the working area. good luck. G.

  3. #3
    welcome Rich good to see you are on your way. Well done.
    If the nagging gets really bad......Get a bigger shed:naughty:

Similar Threads

  1. NEW MEMBER: Hello from Maidenhead
    By deepjoy in forum New Member Introductions
    Replies: 1
    Last Post: 30-09-2010, 02:18 PM
  2. NEW MEMBER: Richard from South Wales
    By RLMTS in forum New Member Introductions
    Replies: 2
    Last Post: 22-01-2008, 03:59 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts