. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Before I joined the forum I was building a plywood router with aluminium angle & skateboard bearings. After joining the forum I bought a gerber system 48 with motherboard problems that I haven't got round to sorting yet but is on my list of things to do lol.

    Anyway, the ply router was almost complete so I decided to finish it & start using it but I seem to have gone wrong somewhere as it doesn't seem to look like the other plywood routers I have seen.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMGP0319.jpg 
Views:	670 
Size:	140.8 KB 
ID:	8640   Click image for larger version. 

Name:	cab.jpg 
Views:	478 
Size:	109.5 KB 
ID:	8641  
    Last edited by martin54; 03-04-2013 at 07:01 PM.

  2. #2
    Hi Martin, can't open your pics. G.

  3. #3
    Must be something I did uploading the pictures Geoffrey

  4. #4
    Blast those dam wooden CNC's, don't you just hate it when that happens.

    Good job of e cabinet Martin.
    If the nagging gets really bad......Get a bigger shed:naughty:

  5. #5
    Martin, I'm guessing that the original plan for your wooden CNC was delivered in pieces that had to be assembled like a jigsaw puzzle? And I'm thinking that the plan-assembly-stage is where things went wrong with your machine.

    The good news is that once you have re-assembled the plan correctly, you should find that most of the machine parts are reusable..... Alternatively you may just find another use for the symmetrical geometry of your current machine!

    Hope This Helps.

  6. #6
    Got the pics now Martin, it just looks like an up to date version of the Gerber, but with the advantage of a superclean hands on controller. G.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: CNC Router Parts
    By CRP in forum New Member Introductions
    Replies: 4
    Last Post: 29-10-2013, 02:37 AM
  2. RFQ: MDF parts required.
    By mZeles in forum Projects, Jobs & Requests
    Replies: 9
    Last Post: 25-10-2013, 01:28 PM
  3. NEW MEMBER: JoeCNC, from Ireland, cabinet maker.
    By JoeCNC in forum New Member Introductions
    Replies: 6
    Last Post: 21-09-2013, 11:24 PM
  4. VFD in main electronics cabinet/general layout?
    By m_c in forum Spindles & Drive Motors
    Replies: 4
    Last Post: 11-04-2013, 06:00 PM
  5. RFQ: Some parts.
    By jcb121 in forum Projects, Jobs & Requests
    Replies: 8
    Last Post: 22-03-2012, 05:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •