Thread: BOB 3 Axis, optical isolation
Your board looks OK... But the Photocoupler you chose are too slow. 18us for rising time and 18us for falling time... 36us total or a minimum pulse with of about 40 / 45us ... You won't be able to pulse faster than: 1/45us = 22.2KHz Mach3 pulse at 25KHz minimum...
See datasheet page 2: http://www.if.pw.edu.pl/~alice/DAC/pc847.pdf
Which optocouplers are suitable for high frequency servos breakout (200khz - 500khz) ?
Need more info, e.g. case style, output type, etc. but a generic 2601 is good for 1MHz or higher.
What you mean case style and output type ?
Because i can't find generic 2601 from these list which are suitable ?
10pcs Toshiba TLP785GB Photocoupler Optocoupler DIP-4 DIP New Original items in wellparts store on eBay!
i mean which optocoupler from all which are in this list is suitable (not only tlp785/please go to link)
Last edited by vre; 05-01-2014 at 12:13 PM.
6N137 is an alternative for HPCL2601
By bikepete in forum Items On eBay UKReplies: 1Last Post: 14-11-2013, 10:42 PM
By thjremy in forum Electronic Project BuildingReplies: 0Last Post: 06-04-2013, 03:42 PM
By Mad Professor in forum General DiscussionReplies: 3Last Post: 16-03-2011, 08:46 PM
By CHudson in forum Milling Machines, Builds & ConversionsReplies: 5Last Post: 10-10-2010, 07:34 PM
By lateAtNight in forum Stepper & Servo MotorsReplies: 2Last Post: 21-06-2009, 11:54 AM