1. #1
    Hey guys.

    I am looking for some cutters, I have searched eBay for the last hour and can only find them in China.

    Normally that would not be a problem, However my job needs to be finished by the weeks end.

    I could do with buying a batch of 5 or better yet 10 (preferably new)

    If any one has some paypal cash waiting.

    Thanks

    Craig

  2. #2
    Think I have a couple you can have if you replace when you next order.
    Let me know if required

  3. The Following User Says Thank You to Bazzer For This Useful Post:


  4. #3
    What flute length do you need?
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  5. #4
    Quote Originally Posted by Jonathan View Post
    What flute length do you need?
    The material I am cutting is 10mm thick so flute length of 10mm or more - Anything longer than 10mm is a bonus really.

    Thank you

  6. #5

  7. The Following User Says Thank You to ptjw7uk For This Useful Post:


  8. #6
    thank you ptjw7uk just put a order in for 10 thanks uppy121

  9. #7
    Quote Originally Posted by uppy121 View Post
    thank you ptjw7uk just put a order in for 10 thanks uppy121
    There should be one of their shops near you?

    Dow, missed that one... I've got a few of those you could have had as since I started using single flute cutters I've not touched the standard router cutters. You need to be careful with the ones from toolstation. They can work well, but they do break easily if you get the feedrate wrong.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  10. The Following User Says Thank You to Jonathan For This Useful Post:


  11. #8
    The toolstation ones are not that good but they cheap enough to learn on!

    Peter

  12. The Following User Says Thank You to ptjw7uk For This Useful Post:


Similar Threads

  1. Carbide cutters
    By Web Goblin in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 24-01-2014, 10:57 AM
  2. 4mm Carbide Cutters Single Flute?
    By deisel in forum Marketplace Discussion
    Replies: 5
    Last Post: 27-03-2013, 07:52 AM
  3. Single Flute vs. Ripper
    By Tenson in forum Tool & Tooling Technology
    Replies: 11
    Last Post: 16-04-2012, 09:51 AM
  4. Single flute carbide cutters
    By Jonathan in forum Tool & Tooling Technology
    Replies: 52
    Last Post: 11-11-2011, 06:48 PM
  5. Cheap carbide cutters
    By HiltonSteve in forum Tool & Tooling Technology
    Replies: 6
    Last Post: 30-07-2009, 08:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •