Get guys, due to work commitments I'm looking for someone to design and cut a z axis and y axis carriage as I just don't have the time and I need to get this machine finished.

If you would like to apply or have a design you would like to sell so It just a case of getting it cut then please apply within.

My gantry consists of 1610mm long 80x160 extrusion with TBR 20 supported rail top and bottom.

I have either a Nema 23 for Z and 34 for Y.

I also have a 12mm screw for the z and 20 you the Y if that's any help.