. .

Thread: Hello Everyone

  1. #1
    Hi Everyone,
    Just a few words about myself.
    A few years ago I decided to junk Dad's old horizontal mill and replace it with a small vertical mill - from Chester Tools UK ltd. After using the mill for a while I became intersted in motorising the X & Y axes, I built a PIC based controller to drive stepper motors on each axis. From this point I added a ball screw for the z axis, thrust bearings in the Y axis and then discovered EMC, built three driver cards and and an opto isolator interface and hey presto Home Brew CNC - Happy Days!
    Currently I'm building myself a simple dividing head.
    Regards
    Abfa9358

  2. #2
    Welcome to the forums Abfa9358, if you'v got pics and a build log feel free to upload your pics to the gallery. You can also start a build log as well ;-)
    .Me

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •