Thread: New Member Intro
Here we go.
My name is Mike and I build and fly radio control model Aircraft and Helicopters, before doing that I restored Military vehicles and Land Rovers. Five years ago I had a accident at work (I was a AA patrol man for 24 years) that has left me disabled so I had to give up restoring vehicles and started building models again after a break of 30 plus years.
Anyway I am about to start my first build of a CNC router and will need lots of help and advice.
Welcome to the forum Mike, you could start by reading some of the build logs, will answer a lot of the questions you may have & give you a good idea how to go about starting your own build.
Thanks for the welcome. I will be starting a build in the DIY CNC Machine Building Router build log, It will be a slow build but I have already started gathering supplies.
Not always a good idea to start collecting parts before you have a design sorted, best to design the machine first & then buy suitable parts for that design, can save you wasting money on parts that aren't really suitable for what you want to build.
I agree its better to design the machine first, I have the machine all ready designed its just the electrics I need to sort out, the design also has provision to be made more rigid without any loss all I need to do is add another piece of aluminium profile.
I have posted the start of the build in the DIY CNC Machine Building and one of the first drawings of the Z axis.
NEW MEMBER: Intro and hello from new memberBy Bone in forum New Member IntroductionsReplies: 2Last Post: 07-01-2014, 02:45 AM
NEW MEMBER: IntroBy vt356b in forum New Member IntroductionsReplies: 5Last Post: 02-09-2013, 10:39 AM
NEW MEMBER: New here - new introBy ChrisTerry in forum New Member IntroductionsReplies: 3Last Post: 05-08-2012, 10:09 AM
NEW MEMBER: Hello / Intro etcBy pjm in forum New Member IntroductionsReplies: 2Last Post: 23-01-2010, 04:59 PM
NEW MEMBER: Intro...By Davidh in forum New Member IntroductionsReplies: 1Last Post: 29-08-2007, 12:58 PM