Thread: Advice Needed - Control Panel
I am starting to plan my control panel for my cnc router and I am struggling to establish what I need to complete it in terms of type of wire and sizes, switches (on/off, limits and home), connectors, fuses, RCBs, even cable tidying, etc.
I have the following:
Breakout Board - http://www.soonwell.com/ebay_file/us...e-Board-Manual
4 off - DQ860MA Stepper Drives
4 off - 60BYGH301B 3.1Nm Stepper Motors from cnc4you
I am looking for a suitable power supply 70 – 75 volts that would be capable of powering this and eventually a 5th axis.
Any advice or pointers in the right direction would be gratefully received as I’m trying to establish a sort of BoM.
Also does anyone have a suitable schematic that I could have as a starter.
By IanParkin in forum Artsoft MachReplies: 19Last Post: 05-09-2014, 03:05 PM
By wiatroda in forum Electronic Project BuildingReplies: 5Last Post: 04-06-2014, 10:19 AM
By GTJim in forum General ElectronicsReplies: 2Last Post: 03-09-2013, 07:42 PM
By m_c in forum Projects, Jobs & RequestsReplies: 5Last Post: 27-04-2013, 07:46 PM
By Jimmybristol in forum Items For SaleReplies: 3Last Post: 10-12-2011, 10:36 AM