Thread: Accuracy Problem
Threaded View
-
17-06-2013 #11
Many thanks Jazz. Here are the 2 TAP files.
tracks
drills
And here are my settings.
Note that after some advice on here I changed Step Pulse to 5us.
The settings above are somewhat different to what my machne setup guide suggested, which was 400 steps, 2000 velocity, 200 accel, 10 step and 3 dir. The machine did not move to the correct scale with these settings.Last edited by richie00boy; 17-06-2013 at 06:34 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Tool diameter accuracy
By Neale in forum Tool & Tooling TechnologyReplies: 15Last Post: 05-03-2014, 11:18 PM -
Help needed with understanding accuracy in measuring tools. I want to go straight :-)
By Boyan Silyavski in forum Tool & Tooling TechnologyReplies: 25Last Post: 01-10-2013, 05:17 PM -
Machine bed accuracy
By Colin Barron in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 03-11-2010, 11:24 AM -
Cheapo Leadscrew with minimum accuracy requirement!
By Vikash in forum Lead Screws, Nuts & SupportsReplies: 16Last Post: 06-10-2010, 11:17 AM -
Ball Screw Accuracy V Price
By Wobblybootie in forum Lead Screws, Nuts & SupportsReplies: 5Last Post: 02-01-2010, 11:55 AM
Bookmarks