1. #1
    hello , have a isel fb2 machine

    now stock they come with a 800watt spindle -cress.

    do I fit a 0.8kw chinese liquid cooled spindle, and run the vfd

    should I get a 1.5 or a 2.2

  2. #2
    I'm not too sure If I'm right here, but the 800w spindle on that machine could be an Ac 230v motor. So it'll have lots of torque nearly all the time. The Chinese spindles are just big brush less motors so they're fast but not too torquey. I have a 1.5kw so I advise you to get the 2.2kw version, if you want to machine metals.

  3. #3
    What model FB2 ?
    I have the earlier small version 300mm x 300mm and use the 0.8Kw air cooled spindle on it.
    Anything bigger in my case would be over kill on a machine this size.
    John S -

  4. #4

    i have this one.
    the quandry is
    1. do I stick on a noisey 240v router
    2. do I stick on a quiet .8kw brushless -water cooled. - 65mm diameter
    3. if I am buying a vfd, should I get a er11 1.5kw spindle - thats 80mm
    4. If I am getting a 80mm spindle should I get the 2.2kw and th 20mm chuck.

    will the z axis witha 16mm ball screw at 5mm pitch, lift it - saying that it had a 4 head injection system on it!!!

    doesn't look too large?
    Last edited by nobby; 27-06-2013 at 02:41 PM.

Similar Threads

  1. WANTED: Isel router wanted
    By j.c.freeman in forum Items Wanted
    Replies: 0
    Last Post: 29-05-2014, 11:20 AM
  2. Replies: 0
    Last Post: 13-11-2013, 06:50 PM
  3. FOR SALE: isel gfm 4433
    By plotter in forum Items For Sale
    Replies: 1
    Last Post: 09-10-2012, 05:00 PM
  4. ISEL Ball nut
    By cncezee in forum Lead Screws, Nuts & Supports
    Replies: 9
    Last Post: 02-10-2010, 11:11 AM
  5. New spindle idea for my machine - DC 1HP
    By HiltonSteve in forum Electronic Project Building
    Replies: 35
    Last Post: 29-08-2010, 06:20 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts