1rst build, time to do next step

[Gytis]

First of all I want to say hello to everyone and thank you for sharing with their experience and knowledge!


After a year or so reading on CNC forums I decided that I have more knowledge about it than before and I think I'm ready to go to the next step.
But first of all I would like to hear from more experienced members than I about my CNC design and hardware, any input or criticism are more than welcome guys.

So there is a components which I decided to use in my build:

Whole machine will be from aluminum, plates (10, 20 and 25 mm thick) and profile 45x90
Ball screw for the X - RM 2005-RM 2010 ???, with fixed + fixed ends
Y - RM1605-RM1610 ???, same as X fixed ends
Z - RM1605
Hiwin profile rails, X-25mm, Y and Z 20mm
Nema 23 motors 320 oz-in 2.8 mH 3.5A, all axis
48V 12.5A power supply
Gecko G540 4 Axis stepper driver
Water-cooled spindle motor 2.2kw with a VFD

oh yes, I forgot to say that is cutting area is about 1220x845 mm

So that is all for now, Thanks again to all and good luck to everyone !

Excuse me for my bad English


Gytis