Thread: Chris in the SW (Exeter)
Started in December 2012 with my first lathe and am about to order the first mill - Sieg SX3 - and am thinking about converting it for CNC?
Interest is model steam engines, model aeroplanes and bits for my diving equipment...
Made a few tools and fittings etc as well (good practise!)
Am in IT as an occupation and comfortable with electronics so might be able to help someone
with something eventually (hopefully)
Member of Newton Abbot Model Engineering Society (NADMES)
Hi Chris, wellcome to the forum. I find Model engineers are nearly always interesting people (or is it just like minded kindred spirits?). If you do convert either of your machines to cnc you will wonder how you ever managed before!! Good luck. G.
What do you think?
My ultimate goal is to go to CNC - but as you are no doubt aware there is a not insignificant cost involved in this and I have to justify it (to myself...)
By mwsufc in forum Opportunities Available & SoughtReplies: 1Last Post: 04-02-2013, 09:42 AM
By mwsufc in forum Opportunities Available & SoughtReplies: 2Last Post: 17-01-2013, 05:41 AM
NEW MEMBER: Hello, I am ChrisBy cdb in forum New Member IntroductionsReplies: 4Last Post: 24-08-2010, 01:53 PM