1. #1


  2. #2
    If you add a drawing with some dimensions it will let everyone see what you need.

  3. #3
    Sounds like he needs a saddle...
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  4. #4
    Quote Originally Posted by Jonathan View Post
    Sounds like he needs a saddle...

    need the mount milled down too.

    i have the aluminium
    i have the 10 by 5mm steel
    Last edited by nobby; 23-07-2013 at 10:50 PM.

  5. #5

  6. #6
    this idea is no good as it involves machining the lower part of the mounting off, so more trouble than it is worth
    also I 'simply' cannot bolt it straight to my t slot plate, as it hits the casting , plus I couldn't slide it.

Similar Threads

  1. spindle mount
    By martin54 in forum Marketplace Discussion
    Replies: 14
    Last Post: 19-01-2016, 08:09 AM
  2. RFQ: Spindle Mount (Ali mill job) - one off
    By Doddy in forum Projects, Jobs & Requests
    Replies: 3
    Last Post: 05-02-2014, 05:42 PM
  3. motor mount nema 23
    By Swarfing in forum Motor Mounts
    Replies: 1
    Last Post: 07-03-2013, 12:03 PM
  4. RFQ: Spindle mount
    By jcb121 in forum Projects, Jobs & Requests
    Replies: 4
    Last Post: 05-02-2012, 01:49 PM
  5. NEW MEMBER: hello from Mount Isa Queensland
    By maddog62 in forum New Member Introductions
    Replies: 1
    Last Post: 30-08-2009, 07:13 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts