1. #1

    lower wide mounting points 150mm
    centre hole 65mm
    to take m6 socket caps
    mill two from 1/2 inch thick alloy
    how much please with post?

    i can send you it dxf
    Last edited by nobby; 24-07-2013 at 10:59 PM.

  2. #2

    ok t slot is 150mm on centres
    I have the slot tab nuts, they are m6 - the bolt length doesn't matter as I shalll cut them
    the socket cap head is 10mm wide

    the motor is really light weight

    is this how you would like the dxf?

    anyways, the other idea of the flat mount is a foolish idea, as it involves spot facing? or milling the mount down,
    I would rather two thin ones as it will look tidier, be less heavyand hold the thing better, plus in the future if i buy a 65mm 1.5kw motor and vhf, I can simply fling it in..........................

    i do not know how I can attatch a dxf to this thread, - is it possible?
    Last edited by nobby; 25-07-2013 at 10:22 AM.

  3. #3
    Flat plate would still work as the original mount would have machined faces on the bottom.
    Check your pm.

  4. #4
    this now taken care of thanks

  5. #5


  6. #6
    Looks nice

  7. #7
    Quote Originally Posted by Web Goblin View Post
    Looks nice
    no, they look frickin awesome, thanks for doing them!!!

  8. #8
    Your very welcome. Im glad your happy with them.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts