. .
  1. #1
    Sorry chaps this is now sold.


    For sale is my RF40 mill drill including the original base and extras in full working order. Based in Bristol UK!

    I realise this is my first post on here but been lurking for a few years. Now need to shift this machine asap.



    Yours for £700. Used to make various small bits including a research rig for a vet and various bits for a CNC conversion.

    Bought the machine 3 years ago and has serve me very well. Now has to go quickly as getting full sized mill. I have fitted a linear scales to all 3 axes with a remote readout on the X and y. Hand scraping still present on the ways.
    Only let down is the table which is as it came to me but once you put a vice on it makes no odds.

    Extras include an Align power feed unit with 110V transformer, Clarkson type collet chuck and spanner, drill chuck with key, unused facemill, tilting vice and a selection of endmills. Must be collected before the bank holiday weekend. Weighs around 250kg so not manual liftable in one piece. Can be dismantled to fit inside an estate car.




    Do not have lifting equipment but you can rent an engine crane and slings to assist in lifting. For shipping, please go to shiply for quotations.

    Contact me through the private messaging system for viewing or questions
    Last edited by komatias; 05-08-2013 at 04:53 PM. Reason: SOld

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FOR SALE: Axminster Drill Clamps - buy one get one free
    By EddyCurrent in forum Items For Sale
    Replies: 3
    Last Post: 26-04-2014, 02:25 PM
  2. FOR SALE: Sherline CNC Hobby mill. Plus extras and PC
    By cooliced in forum Items For Sale
    Replies: 5
    Last Post: 05-07-2013, 01:36 PM
  3. 4th Axis timing pulley + Axminster bandsaw review
    By Jonathan in forum Metalwork Project Showcase
    Replies: 4
    Last Post: 09-04-2011, 07:31 PM
  4. Is it possible to modify a drill to be an end mill?
    By HankMcSpank in forum Tool & Tooling Technology
    Replies: 4
    Last Post: 29-04-2010, 02:51 PM
  5. Help with drill-Mill conversion
    By Ross77 in forum Milling Machines, Builds & Conversions
    Replies: 134
    Last Post: 02-04-2010, 10:25 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •