Threaded View
-
21-08-2013 #20
I wouldn't go running full welds round the edges if they are only for decoration and capping purposes. There will be a lot of heat generated for those welds and you want to keep heat to minimum.
Just chamfer the 4 corners and tack weld into place they will be more than stronger enough.
If you must fully weld then just chamfer the edges. If your on your own with no one to hold then buy some cheap magnet clamps to help.
Edit: Gytis . . if your still reading this then go check your email ASAP please.!!Last edited by JAZZCNC; 21-08-2013 at 05:17 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: First steel diy CNC router build
By ivars211 in forum DIY Router Build LogsReplies: 59Last Post: 28-07-2014, 08:29 PM -
BUILD LOG: Steel/Aluminium design/build, sorta smallish, cuts ali hopefully
By mart154 in forum DIY Router Build LogsReplies: 27Last Post: 19-09-2013, 05:48 PM -
BUILD LOG: Vertical fixed gantry. Design & build. (Steel/epoxy)
By Greeny in forum DIY Router Build LogsReplies: 8Last Post: 19-08-2013, 08:26 PM -
BUILD LOG: 7' X 4' Steel frame build
By Ricardoco in forum DIY Router Build LogsReplies: 6Last Post: 28-10-2012, 06:02 PM -
Design help etc required with DIY CNC Router Design / Build
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 12Last Post: 21-10-2011, 04:50 PM
Bookmarks