. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #21
    This works very well, it's this bottle trap, Toolstation > Plumbing > Traps & Waste > Shallow Bottle Trap with the guts, top and bottom cut off.
    Click image for larger version. 

Name:	dust1.JPG 
Views:	6098 
Size:	119.5 KB 
ID:	12203

    The pipe is 40mm. Because the bottom part of the trap screws on, plus the fact it was only £2.24, I was thinking that a few could be bought so that skirts of different lengths could be attached to the removable part thus enabling quick changing of skirts. In reality the depth of the trap as shown in the photo is ideal for a 75mm long cutter but for a shorter 12mm long cutter my collet length is too short and the body of the spindle motor crashes into the top of the bottle trap.
    The plan was to manually set the height of it to just above the workpiece, independent of the Z axis.

    I tried it with a 12.7mm dia. cutter 5mm DOC and it picked up every particle, the suction was high using one of these http://www.tool-net.co.uk/p-345940/d...FTHItAodYxUAwQ, no need for a 100mm pipe whatsoever.
    Last edited by EddyCurrent; 24-04-2014 at 03:36 PM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

Thread Information

Users Browsing this Thread

There are currently 4 users browsing this thread. (0 members and 4 guests)

Similar Threads

  1. Dust Shoe Deisgn
    By m.marino in forum Open Source Designs & Plans
    Replies: 0
    Last Post: 01-08-2013, 12:19 PM
  2. Open Source Servos
    By D.C. in forum Open Source Designs & Plans
    Replies: 0
    Last Post: 07-03-2013, 07:29 PM
  3. Open Rail, open source linear rail?
    By Musht in forum Open Source Designs & Plans
    Replies: 0
    Last Post: 15-06-2012, 12:21 PM
  4. SHAPEOKO, the open source CNC
    By baz550 in forum Open Source Designs & Plans
    Replies: 6
    Last Post: 31-05-2012, 08:59 PM
  5. Open source group project, anybody interested?
    By Wotsit in forum Open Source Designs & Plans
    Replies: 28
    Last Post: 15-12-2009, 01:05 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •