Page 1 of 2 12 LastLast
  1. #1
    CNC ROUTER HAND BUILT CNC MILLING CNC ROUTER PLUS CNC SOFTWARE AND COMPUTER | eBay


    fairplay to whoever built this.Its evident a lot of time has gone into it... but O M G. Is there anything actually right with this?

  2. #2
    Just wants the chain adjusting,
    John S -

  3. #3
    i2i's Avatar
    Lives in Cardiff, United Kingdom. Last Activity: 23-12-2016 Has been a member for 7-8 years. Has a total post count of 693. Received thanks 30 times, giving thanks to others 0 times.
    could be the cotter pins, or maybe there's to many "inces"

  4. #4
    looks like one those blacktoe cnc kits

  5. #5
    Oh dear. Is that 35mm DIN rail I see for the slides? And 1/2" chain for the drive? And a block of hard wood with a hole in it for the bearing? I love the masking tape on the front which says "Danger live mains" and has an arrow pointing towards an exposed board. The parts are clearly the standard Chinese stuff we all use...but bought from a British seller. What's it worth? Maybe a few hundred for parts?
    Last edited by birchy; 15-08-2013 at 11:55 AM.

  6. ...it has 22 people watching it ...I wonder how many of them are 'compinent in what there doing' :-p

  7. #7
    I have it in my watch list purely to see if it actually sells for the 1300+ he's asking for. I'm probably not the only one laughing at it...

    And don't take the piss out of his smelling pistakes, he myt bee anurrexic.

  8. #8
    i2i's Avatar
    Lives in Cardiff, United Kingdom. Last Activity: 23-12-2016 Has been a member for 7-8 years. Has a total post count of 693. Received thanks 30 times, giving thanks to others 0 times.
    Quote Originally Posted by birchy View Post
    I have it in my watch list purely to see if it actually sells for the 1300+ he's asking for. I'm probably not the only one laughing at it...

    And don't take the piss out of his smelling pistakes, he myt bee anurrexic.
    I wish I was anurrexic, could do with loosing a few pounds, as the buyer will.

  9. #9
    Quote Originally Posted by JAZZCNC View Post
    No he'll sell it ok there's a lot fucking idiots out there with too much Bloody money.!!!
    If that thing sells for that sort of money, I'm going into business!

  10. #10
    Waste of a good power supply :|
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

Page 1 of 2 12 LastLast

Similar Threads

  1. "Hacking" and "Modding"
    By magicniner in forum General Discussion
    Replies: 15
    Last Post: 07-01-2015, 08:59 PM
  2. "Racks" VS "ball screw"
    By C.AlveSilva in forum Linear & Rotary Motion
    Replies: 1
    Last Post: 17-04-2012, 11:53 PM
  3. Digiplan parts left from "upgrade"
    By black5f in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 17-03-2011, 12:02 AM
  4. Sourcing "US/ANSI" parts in UK?
    By vputz in forum Machine Discussion
    Replies: 2
    Last Post: 09-08-2010, 12:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •