. .
  1. #1
    dsc's Avatar
    Lives in Lincoln, United Kingdom. Last Activity: 17-06-2020 Has been a member for 9-10 years. Has a total post count of 252. Received thanks 1 times, giving thanks to others 11 times.
    Gents,

    I'm in need of some help to get a few ali plates in the right state. All parts are machined from standard ali tooling plate (PA11), which is roughly 15.20-15.25mm, shapes are mostly rectangular, with two L shaped pieces, max dimensions 465mm length. Here's what's needed:

    - skim two rectangular plates to 15.00mm thickness (or as close as possible)

    - enlarge 10 counterbored M5 holes, these were done as 5.3mm, but 5.5mm is needed to give more clearance

    - drill and tap 8 x M4 holes, 8mm deep

    - enlarge two holes, one from 40mm to 64mm, other from 20mm to 42mm

    - drill 3 counterbore M5 holes

    I've been told all together this shouldn't take more than 4 hours, so hopefully someone will be able to squeeze it in (fingers crossed). I'm in Lincoln and would prefer to come over with the plates to discuss what needs doing and where, leave the parts or wait, doesn't really matter. I can also post of course if there's no other way. This is a bit of a priority as I've waited a long time to get these done, but sadly it didn't turn out right (no one's fault, just life).

    Cheers,
    Tom

  2. #2
    I'm in Sheffield if thats not to far
    I can do asap
    you can help or wait for them or post to me

    Ian

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RFQ: 2 x Headphone Amp cases machined from Walnut.
    By SamW in forum Projects, Jobs & Requests
    Replies: 8
    Last Post: 20-04-2013, 09:03 AM
  2. RFQ: 50x Small machined, anodised, engraved plates
    By Husky in forum Projects, Jobs & Requests
    Replies: 1
    Last Post: 10-03-2013, 12:18 AM
  3. machined ballscrews
    By wilfy in forum Lead Screws, Nuts & Supports
    Replies: 15
    Last Post: 30-07-2012, 05:42 PM
  4. RFQ: Small Alu plates needed
    By m_c in forum Projects, Jobs & Requests
    Replies: 6
    Last Post: 06-06-2012, 01:33 PM
  5. RFQ: Parts CNC machined from Nylon
    By egimson in forum Projects, Jobs & Requests
    Replies: 3
    Last Post: 02-04-2012, 08:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •