. .
Page 1 of 2 12 LastLast
  1. #1
    Denford MIRAC CNC lathe.
    Specification: Swing over Bed: 250mm (10”)
    Maximum Turning Diameter: 160mm (6.25”)
    Maximum turned length: 180mm (7”)
    Spindle Bore: 21mm (0.8125”) No. 3 M.T.
    Spindle Nose Type: A2 42mm (1.625”)
    Spindle Speeds: 0 – 5000 R.P.M.
    Feedrates: 0 – 1200mm/Minute
    Spindle Motor: 1 H.P.
    X axis travel: 85mm (3.375”)
    Y axis travel: 200mm (8”)
    Coolant capacity: 18 Litres
    Machine resolution: 0.01mm (0.0004”)
    Machine Weight: 320 Kg. (705Lbs.)
    Electrical requirements: 240 Volt SINGLE PHASE
    Machine Length: 1090mm (43”)
    Machine Depth: 970mm (38.2”)
    Machine Height: 625mm (24.6”)
    Machine Features:
    RS232 Port. Plug for external keyboard. Auxilliary 7 Pin socket.
    (Serial Port, Parallel Port) Coolant pump, sump and drain valve.
    Internal lighting above work area. Safety interlocked sliding door with window.
    Internal and external jaws for 3 Jaw chuck. Chuck key.
    4 brand new and 1 used quick release tool holders. Release key and tool clamp key.
    Parting off tool with indexable carbide bit and holder.
    Built in enhanced colour graphics display and membrane keyboard.
    Floppy Disc Drive.
    Emergency stop button.
    Control Software has over 40 features to allow complete control and federate over-ride of 0 –150% Other features include:
    Manual Data Input facility.
    Internal and External screw cutting.
    Tool nose radius compensation.
    Metric or imperial Prgramming.
    Circular and Linear Interpolation.
    Canned Turning Cycles.Tool Offsets for 16 Tools
    Dry Run facility.
    Toolpaths Graphics in colour 2D or 3D display.
    Program merging facility.
    Jog mode with variable feedrates.
    LAN communication if required.
    Axis over-travel limits.
    And many more (Contact me for full list)

    Software and Complete Documentation:
    MillCam Designer software. Post Processor Libraries
    Denford Industrial Text Editor software. Denford Dongle
    MIRAC Maintenance manual MIRAC operating software and backup disc.
    Denford Lathe CAM Designer instruction Manual
    Denford Mill CAM Designer 2 instruction Manual
    Denford Industrial Text Editor Instruction Manual

    Denford MIRAC offline programming instruction Manual which includes G Code and M Code descriptions and comprehensive screen displays descriptions.
    MIRAC CNC Lathe Installation, Operation and maintenance manual.

    Original Denford Technical Brochure.

    I can lift the machine onto your transport. It will fit in a large estate car.

    OFFERS INVITED.

    e-mail: [email protected].
    Phone: 01483 284114 (Work) and 01483 282627 (Home)
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Lathe three quarter small image.jpg 
Views:	3578 
Size:	245.0 KB 
ID:	9249   Click image for larger version. 

Name:	Lathe door open small image.jpg 
Views:	2682 
Size:	372.1 KB 
ID:	9250   Click image for larger version. 

Name:	Tool holders small image.jpg 
Views:	705 
Size:	285.8 KB 
ID:	9252   Click image for larger version. 

Name:	Jaws, keys and valve small image.jpg 
Views:	557 
Size:	170.7 KB 
ID:	9253   Click image for larger version. 

Name:	Floppy discs small image.jpg 
Views:	634 
Size:	295.5 KB 
ID:	9254   Click image for larger version. 

Name:	Denford Mill CAM Designer Manual small image.jpg 
Views:	603 
Size:	326.8 KB 
ID:	9255   Click image for larger version. 

Name:	Communication cable small image.jpg 
Views:	492 
Size:	205.2 KB 
ID:	9257   Click image for larger version. 

Name:	Control panel and display small image.jpg 
Views:	629 
Size:	378.4 KB 
ID:	9258   Click image for larger version. 

Name:	MIRAC installation and Operation Manual.jpg 
Views:	522 
Size:	342.0 KB 
ID:	9263   Click image for larger version. 

Name:	Lathe CAM Designer small image.jpg 
Views:	479 
Size:	321.7 KB 
ID:	9261  

    Click image for larger version. 

Name:	MIRAC Maintenance manual.jpg 
Views:	497 
Size:	313.8 KB 
ID:	9264   Click image for larger version. 

Name:	MIRAC offline editor manual.jpg 
Views:	463 
Size:	316.4 KB 
ID:	9265   Click image for larger version. 

Name:	Parting off tool tool holder and tool .jpg 
Views:	491 
Size:	164.8 KB 
ID:	9266   Click image for larger version. 

Name:	Side panel small image.jpg 
Views:	495 
Size:	362.9 KB 
ID:	9267   Click image for larger version. 

Name:	Text editor manual small image.jpg 
Views:	434 
Size:	317.9 KB 
ID:	9268  
    Last edited by Jonathan; 22-08-2013 at 12:03 AM. Reason: SOLD

  2. I will be keeping my eyes on this, but I have a feeling it will be out of my price range.
    "If first you don't succeed, redefine success"

  3. #3
    I'll give you £100 if you include shipping

  4. Nemo1966: I will raise you to £500 CASH, and I will collect it.

    Nick Butler: But to be fair I think you should really just list it on eBay, and put the link here.
    "If first you don't succeed, redefine success"

  5. #5
    £600 and Mad Professor Will collect it
    Last edited by Nemo1966; 17-07-2013 at 05:52 PM.

  6. #6
    asto's Avatar
    Lives in Attica, Greece. Last Activity: 29-12-2019 Has been a member for 8-9 years. Has a total post count of 65.
    Quote Originally Posted by Nemo1966 View Post
    £600 and Mad Professor Will collect it
    If the machine is running properly I can pay you a thousand pounds.
    But...I do not know, is it still available?

    regards

  7. #7
    asto's Avatar
    Lives in Attica, Greece. Last Activity: 29-12-2019 Has been a member for 8-9 years. Has a total post count of 65.
    Quote Originally Posted by Nemo1966 View Post
    £600 and Mad Professor Will collect it
    Hey Nick...your e-mail address <[email protected].> returns a message which says this email address is not valid.

  8. remove the fullstop at the end of his e-mail address and it works fine.
    "If first you don't succeed, redefine success"

  9. #9
    asto's Avatar
    Lives in Attica, Greece. Last Activity: 29-12-2019 Has been a member for 8-9 years. Has a total post count of 65.
    Is that so?
    Thanks Mad Professor.

    regards

  10. #10
    asto's Avatar
    Lives in Attica, Greece. Last Activity: 29-12-2019 Has been a member for 8-9 years. Has a total post count of 65.
    Hey Mad Professor. Do you know if this machine is still available?

    cheers

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Big single phase servos and drivers
    By m_c in forum Stepper & Servo Motors
    Replies: 0
    Last Post: 04-09-2013, 01:18 AM
  2. convert 3 phase to single phase?
    By D-man in forum General Electronics
    Replies: 10
    Last Post: 06-04-2013, 12:16 AM
  3. Panasonic 3 phase driver running on 1 phase?
    By gavztheouch in forum Motor Drivers & Controllers
    Replies: 2
    Last Post: 10-05-2012, 11:21 PM
  4. FOR SALE: Denford Mirac CNC Lathe with Auto Tool Changer For Sale
    By CHudson in forum Items For Sale
    Replies: 3
    Last Post: 19-02-2011, 12:11 AM
  5. Denford Mirac Electronics Refurbishment
    By CHudson in forum Computer Software
    Replies: 11
    Last Post: 17-06-2010, 08:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •