Page 2 of 2 FirstFirst 12
  1. #11
    Quote Originally Posted by badgerman View Post
    Good thinking. I might get back in touch with the KEB rep and see if he can reverse engineer the menus settings. I know you can connect it to a pc so I might try that too.
    Careful here you can easily wipe the settings back to default or if doing a firmware update screw things up. Before messing Make sure you Wright down all the relevant settings.!!

  2. #12
    Quote Originally Posted by JAZZCNC View Post
    Careful here you can easily wipe the settings back to default or if doing a firmware update screw things up. Before messing Make sure you Wright down all the relevant settings.!!
    Already done, I created a document to explain the differences and communicate the values in my inverter to the KEN rep.

  3. #13
    Just get an inverter based on motor current and voltage and the input voltage you require e.g. 240v single phase. I have found these people very good
    AC Inverter Drives (230V) (Page 1 of 43)

    The motors shown are slightly odd in that they are 200v and 185v when connected in 'star' as shown on the rating plate, normally a motor would be 230v when connected in 'delta' and 415v in 'star'.
    Obviously these are bespoke motors.
    Last edited by EddyCurrent; 15-09-2013 at 09:48 PM.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Confirming PSU spec for steppers.
    By Rogue in forum Stepper & Servo Motors
    Replies: 103
    Last Post: 13-01-2014, 12:37 AM
  2. 50/60 volt spindle inverter.
    By GEOFFREY in forum Spindles & Drive Motors
    Replies: 0
    Last Post: 24-12-2012, 03:58 PM
  3. Water cooled chinese spindle collets, Advice from owners please
    By craigrobbo in forum Generic Chinese Spindles
    Replies: 15
    Last Post: 11-05-2012, 12:08 PM
  4. FOR SALE: 2.2KW Water Cooled Spindle + Inverter (yes the Chinese one!)
    By Bokoshoko in forum Items For Sale
    Replies: 3
    Last Post: 06-02-2012, 12:43 PM
  5. System spec and Mach3
    By gorbo in forum Computer Hardware
    Replies: 5
    Last Post: 23-01-2011, 03:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •