. .

Thread: Build and Intro

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 11-11-2013 #9
    danilom's Avatar
    Lives in Novi Sad, Serbia and Montenegro.
    danilom
    Last Activity: 23-02-2017 Has been a member for 9-10 years. Has a total post count of 3.
    Solder off the mosfets one by one and check them with multimeter like this
    Testing a MosFet

    but first solder off the large resistors and check their resistance, you can check them with basic diode (continuity) test and as they are low ohms will seem like a short, they are broken if there is no reading at all.

    I fried 2 drives and nothing but a mosfet and the resistor got fried inside :)

    and you have to solder them off the board because the readings won't be correct while its connected to other components.
    Last edited by danilom; 11-11-2013 at 09:20 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: Intro
    By vt356b in forum New Member Introductions
    Replies: 5
    Last Post: 02-09-2013, 11:39 AM
  2. NEW MEMBER: New here - new intro
    By ChrisTerry in forum New Member Introductions
    Replies: 3
    Last Post: 05-08-2012, 11:09 AM
  3. NEW MEMBER: Intro
    By Ian Hart in forum New Member Introductions
    Replies: 2
    Last Post: 22-02-2010, 06:06 AM
  4. NEW MEMBER: Hello / Intro etc
    By pjm in forum New Member Introductions
    Replies: 2
    Last Post: 23-01-2010, 05:59 PM
  5. NEW MEMBER: Intro...
    By Davidh in forum New Member Introductions
    Replies: 1
    Last Post: 29-08-2007, 01:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules