Quote Originally Posted by JAZZCNC View Post
I spread a layer of Epoxy putty on the bottom plate. Then I put layer of plastic between rails and plate then lightly tighten together pushing some excess out then set the rails on same plane and parallel etc. The putty gives plenty of time for adjustment and dries hard has metal.
It has dampening quality's has well so helps with vibes transferring thru frame. It drills and taps easy and fills any voids, I can shape to match radius etc and it easy grinds and sands if needed.
When set 24hr later I have a perfect hard surface that sets rails exactly on same plane. The rails can be removed and go back exactly on same level so no messing around with shims etc.
To be honest, as my english arent good , i dont understand excactly what you did
When you say "I put layer of plastic between rails and plate" what you mean? what kind of plastic ? and when you say "between rails and plate" what do you mean? Your rails rest on a plate or on a square beam ? Sorry for asking but i dont get it