. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Hi Everybody
    My name is Vagelis and I am from Greece
    I would like your advice and your opinion on the plans below.
    Involving a cnc (1500mm x 1000mm) which
    will runs with Yaskawa servo 400 watt
    Supported profiled rails 20mm, ballscrews X, Y 20mm Z 16mm
    Spindle 2,2 KW water cooled

    The following plans have to do with the table
    I want to make something stiff and adjustable
    The main table is made with 80X80 5mm square tube and the X axis rails will be placed on two ( each side ) I beams. The one I beam (120mm height) will be welded on the table and the above will be adjustable up-down left-right with screws. Before i go on with the plans i think that it will be good to get some opinions from the "experts" as i am amateur at cnc constructions ( sory for my english).
    My main concern is if I beam is suitable for this purpose, or it is better to go with 120X60 5mm tube
    The cutting surface will also be adjustable from the brown L shape angle that can be moved up and down.

    Thanks everybody for your time
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	base top.JPG 
Views:	845 
Size:	106.9 KB 
ID:	10407   Click image for larger version. 

Name:	base.JPG 
Views:	1648 
Size:	247.8 KB 
ID:	10408   Click image for larger version. 

Name:	base 1.JPG 
Views:	1056 
Size:	374.6 KB 
ID:	10409   Click image for larger version. 

Name:	base 2.JPG 
Views:	870 
Size:	84.4 KB 
ID:	10410   Click image for larger version. 

Name:	base front.JPG 
Views:	764 
Size:	69.3 KB 
ID:	10411   Click image for larger version. 

Name:	base left.JPG 
Views:	784 
Size:	115.1 KB 
ID:	10412  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: New build.Stell frame cnc 1500X1000.Ball screw and gearing calculations
    By ba99297 in forum DIY Router Build Logs
    Replies: 12
    Last Post: 03-09-2013, 10:37 PM
  2. Adjustable spindle mount?
    By cncJim in forum Marketplace Discussion
    Replies: 2
    Last Post: 19-06-2013, 08:58 PM
  3. Your Opinion
    By PWD in forum Milling Machines, Builds & Conversions
    Replies: 4
    Last Post: 22-05-2012, 11:02 AM
  4. Opinion about the structure of the router ...
    By C.AlveSilva in forum Gantry/Router Machines & Building
    Replies: 11
    Last Post: 01-05-2012, 02:03 PM
  5. WANTED: adjustable tailstock
    By johngoodrich in forum Items Wanted
    Replies: 0
    Last Post: 29-03-2012, 07:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •