Page 2 of 2 FirstFirst 12
  1. #11
    It shouldn't take much work to get it to run on a different PIC, but still probably not worth it...
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  2. I did actually rework it to run on a different PIC ( IIRC from F477? to F452?) for my own, unfinished (and likely to now remain so), 4th axis. As I recall it was a case of changing header and fuse files and recompiling. But for the fiver or so the right PIC costs you're right it isn't worth it. (before anyone asks the files are currently inaccessible to me as pc in storage).

    Quote Originally Posted by Jonathan View Post
    It shouldn't take much work to get it to run on a different PIC, but still probably not worth it...

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Is there a specific setting for using a diamond drag tool for engraving?
    By petesos in forum Tool & Tooling Technology
    Replies: 4
    Last Post: 14-03-2014, 12:22 AM
  2. How can I find fast stepper motor / controller combo?
    By JuKu in forum Stepper & Servo Motors
    Replies: 2
    Last Post: 23-07-2013, 12:32 PM
  3. Recommended Cutters / bits from eBay for specific job
    By Fivetide in forum Tool & Tooling Technology
    Replies: 1
    Last Post: 22-11-2012, 11:42 PM
  4. 45 Degree and round-over bits?
    By Tenson in forum Tool & Tooling Technology
    Replies: 4
    Last Post: 05-05-2012, 04:13 PM
  5. 55 degree cutter
    By ptjw7uk in forum Tool & Tooling Technology
    Replies: 5
    Last Post: 08-06-2009, 10:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •