Two years ago, I bought a Gerber System 48 Machine with a Mach 3 operating software from a fellow sign-maker. However, I have not had the chance to operate it. I now have a job to cut a decent amount of flat cut letters in aluminium composite and I am looking to go through a training course on how to operate this machine. I am able to create DXF files from a CAD/CAM software but I am unsure on how to use it on Mach 3 and load the G-code file.
My business is situated in Perivale, London UB6 7JB.
So if anyone is able to provide me with training, I would very much appreciate it. Please PM me for any further details.
PS: The machine is in fully working condition.
By nodgeruk in forum Machine DiscussionReplies: 1Last Post: 17-09-2014, 04:53 PM
By martin54 in forum Milling Machines, Builds & ConversionsReplies: 67Last Post: 13-09-2013, 11:35 AM
BUILD LOG: Gerber system 48 conversionBy martin54 in forum DIY Router Build LogsReplies: 14Last Post: 25-08-2013, 10:29 AM
By poppa jock in forum Machine DiscussionReplies: 0Last Post: 29-07-2013, 04:43 PM
By Kevini in forum Artsoft MachReplies: 4Last Post: 03-03-2011, 11:09 AM