Thread: Bridgeport Mill Textron
I have for sale an old but hardly used bridgeport mill,
I'm not sure of working area but its a Textron type mill at least 20 years old.
Tight on all axes,
Power Feed on X
Low voltage light works
Has a power inverter for running on 240v (but could easily be run on 3 phase)
Comes with assortment of Tooling & Vices.
Very similar to this machine, except no DRO
Bridgeport Textron mill milling machine | eBay
Would be an Ideal cnc conversion project or handy manual mill!
Looking for circa £2000
Message me for more details as it wont let me upload photos today :/
Not wanting to piss on anyones chips but these machines do not make a good donor machine for CNC.
For a start you have to throw at least 2K at them for the conversion as regards ballscrews, motors drivers etc and then all you have left is a converted machine that is worth far less than the manual machine you started with.
If you want CNC at this level then buy a dead machine and upgrade it. For a start it will have ballscrews, motors, pressure oiling, chrome slides and chances are little work as these early BOSS machines had crap electronics and spent more time broken down than working.
A grand should get you a decent machine to start with.
Bridgeport series1 interact cnc 150 tnc | eBay
Last edited by John S; 26-11-2013 at 09:40 AM.John S -
FOR SALE: bridgeport interact 4By cutter23 in forum Items For SaleReplies: 2Last Post: 01-07-2014, 11:47 AM
By drumsticksplinter in forum Milling Machines, Builds & ConversionsReplies: 7Last Post: 08-03-2013, 03:47 PM
By Tony Goodwin in forum Bridgeport Milling MachinesReplies: 0Last Post: 08-08-2011, 07:11 AM
FOR SALE: Bridgeport x and y traverse unitsBy Philmollatt in forum Items For SaleReplies: 2Last Post: 18-11-2009, 05:35 PM
By Philmollatt in forum Items WantedReplies: 0Last Post: 10-10-2009, 02:22 AM