Page 1 of 2 12 LastLast
  1. #1
    Hi all,

    I am posting this on behalf of someone else, I actually I bought my machines from him as it was part of a business clearance/liquidation. I have limited details on the machines as I have only viewed them briefly I really cannot vouch for their current condition. What I can say is that these machines are all of a very solid construction and if I were planning a first build I would certainly consider one so that the lion share of mechanicals were already complete. All I can say is that I purchased a few machines from this guy (I was planning to build one) and they were great. I re-fitted the controllers because ISEL ones are a bit naff and they are up and running.

    If you see a machine of interest don't ask me how much for it - tell me how much you would pay for it as a 'Punt' (punt defined as "if the machines were a bit rubbish and needed a refurb it would still be a good price"). This is how I bought my machines and two had no issue but one I had to strip, clean and refurbish. Even with that effort it was still worth what I paid.

    Not sure if they will have the spindles attached - they are the kind of thing that might have disappeared.

    Sorry for not being very helpful - but I am just the messenger!



    I think this is about 200x150mm (really don't know) but I am pretty sure it is meant to have the indexer that is stuffed in the CPM below.



    ICP 2015
    200 x 150 x 90mm



    CPM 2018
    200 x 150 x 90mm



    UNIMATIC SYSTEMS
    MODEL EP 1090
    Possibly these dims 310 x 420 x 90 mm (info is sketchy)

  2. #2
    Where are these machines located?

  3. #3
    They are in Swindon currently.

  4. #4
    How did you find them? Can you offer contact details?

  5. #5
    Quote Originally Posted by badgerman View Post
    Hi all,

    I am posting this on behalf of someone else, I actually I bought my machines from him as it was part of a business clearance/liquidation. I have limited details on the machines as I have only viewed them briefly I really cannot vouch for their current condition. What I can say is that these machines are all of a very solid construction and if I were planning a first build I would certainly consider one so that the lion share of mechanicals were already complete. All I can say is that I purchased a few machines from this guy (I was planning to build one) and they were great. I re-fitted the controllers because ISEL ones are a bit naff and they are up and running.

    If you see a machine of interest don't ask me how much for it - tell me how much you would pay for it as a 'Punt' (punt defined as "if the machines were a bit rubbish and needed a refurb it would still be a good price"). This is how I bought my machines and two had no issue but one I had to strip, clean and refurbish. Even with that effort it was still worth what I paid.

    Not sure if they will have the spindles attached - they are the kind of thing that might have disappeared.

    Sorry for not being very helpful - but I am just the messenger!



    I think this is about 200x150mm (really don't know) but I am pretty sure it is meant to have the indexer that is stuffed in the CPM below.



    ICP 2015
    200 x 150 x 90mm



    CPM 2018
    200 x 150 x 90mm



    UNIMATIC SYSTEMS
    MODEL EP 1090
    Possibly these dims 310 x 420 x 90 mm (info is sketchy)
    I am new to this forum so don't know if one can postmark direct // email.

    I am very interested in one of these units and would like to pop up and take a look if possible (I live in dorset and am currently working in N Dorset)

    Happy to give you my mobile number if that helps.

    Egret

  6. #6
    Hi all, sorry for being a bit slow responding you all. I have been a bit busy! I will ring the owner tomorrow with all your requests and see of we can arrange something.

  7. #7
    Apologies people, I have tried contacting the owner of the machines and have had no response. I appreciate that this probably doesn't inspire much confidence!

    I will keep trying.

  8. #8
    Keep me posted!

  9. #9
    100 quid for the bottom one

  10. #10
    am interested if they are still available

Page 1 of 2 12 LastLast

Similar Threads

  1. RFQ: Small sized Parts need making, small batches
    By Ptee in forum Projects, Jobs & Requests
    Replies: 3
    Last Post: 17-01-2014, 06:07 PM
  2. NEW MEMBER: Cornish Designer with ISEL CNC machines (x3)
    By badgerman in forum New Member Introductions
    Replies: 5
    Last Post: 26-09-2013, 12:22 AM
  3. Small metal Lathes / IE 350 to 50W machines
    By dudz in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 43
    Last Post: 21-08-2013, 09:11 AM
  4. FOR SALE: isel gfm 4433
    By plotter in forum Items For Sale
    Replies: 1
    Last Post: 09-10-2012, 06:00 PM
  5. ISEL Ball nut
    By cncezee in forum Lead Screws, Nuts & Supports
    Replies: 9
    Last Post: 02-10-2010, 12:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •