Thread: Sherline Conversion Questions
Hoping to make contact with anyone ( realistically in the UK.....no offense !) who has had recent experience of converrting either a Sherline Lathe or Mill, to CNC.
I know there are packages out there but I am looking to make contact with those who have made the conversions without spending an arm and a leg on Import Duty and Vat.
Are the manual (imperial) leadscrew threads ok or do they have to be modded to minimise backlash?
Source for Steppers of the appropriate type
Source for Power supply /breakout/controllers?
Can Corel be used as the drawing medium
Thanks in advance......Carsy
By victorismyhero in forum Machine DiscussionReplies: 4Last Post: 16-07-2013, 05:44 PM
By cooliced in forum Items For SaleReplies: 5Last Post: 05-07-2013, 12:36 PM
By cooliced in forum Sherline MillsReplies: 37Last Post: 12-01-2013, 09:22 PM
By jcb121 in forum General DiscussionReplies: 5Last Post: 03-06-2012, 07:20 PM
CONVERSION: My Sherline Mill Conversion videosBy panofish in forum Conversion Build LogsReplies: 2Last Post: 06-05-2012, 06:13 AM