. .

Thread: Breakout Board

  1. #1
    Hi guys im gonna make the move and wire in the new chinese 2.2kw spindle that i bought, im just looking for recommedations on breakout boards that will switch on the spindle though mach when i run a toolpath. All help greatly appreciated. Dont mind the spelling.
    Thanks

  2. #2
    I use these, the SPMODv2 spindle board plugs into the bob so no extra wiring, both work great, I'm using Mach3.
    It's setup so that an M3 instruction closes the spindle relay and for example S6000 makes the spindle rotate at 6000 RPM.
    If you decide to get these go for the one with 2 relays, these use pins 14 and 17, I can't imagine you would want counter clockwise so the relay on say pin 14 could be used for other purposes as it can handle 240v ac at 10 amps.

    SYSTEM1
    System4
    Last edited by EddyCurrent; 11-12-2013 at 09:40 AM.

  3. #3
    Thanks eddy ill have a look at this,
    Thanks for your reply.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. breakout board usb or parallel
    By crossleymarko in forum Motor Drivers & Controllers
    Replies: 13
    Last Post: 30-07-2013, 12:44 PM
  2. Breakout Board Comparison
    By 200thhorseman in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 27-03-2012, 12:28 AM
  3. FOR SALE: PMDX-122 Breakout board
    By IN-WondeR in forum Items For Sale
    Replies: 0
    Last Post: 14-12-2011, 04:05 PM
  4. Breakout Board
    By croy in forum Electronic Project Building
    Replies: 10
    Last Post: 18-08-2011, 07:50 AM
  5. eBay: CNC Breakout board cheap - that will do me !
    By Lee Roberts in forum Items On eBay UK
    Replies: 9
    Last Post: 14-08-2009, 05:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •