Thread: Chinese 3040T Arrives
-
30-01-2014 #51
My is 3040T and the spindle is a ER-11
-
30-01-2014 #52
-
30-01-2014 #53
For my tools...
because the blades of the tool are down...
They cut in opposite side..Last edited by Lee Roberts; 30-01-2014 at 10:10 PM.
-
30-01-2014 #54
I've not seen those, all I've seen are 'up spiral' and 'down spiral' cutters but they all rotate in the forward direction.
http://www.trend-uk.com/en/UK/trend/...ledge&id=15884
-
30-01-2014 #55
my turn in the clockwise direction.... it is right that there has to turn in that direction??
thanks for the reply me man...Last edited by Lee Roberts; 30-01-2014 at 10:11 PM.
-
30-01-2014 #56
Looking down on the machine all cutters should turn in the clockwise direction, same direction as a drill would. The up and down spirals are in opposite direction but they both cut in the clockwise direction.
Did you look at the link above to trend-uk.com ?Last edited by EddyCurrent; 30-01-2014 at 10:13 PM.
-
30-01-2014 #57
then I bay something wrong... :(
-
30-01-2014 #58
-
30-01-2014 #59
clockwise direction....
-
30-01-2014 #60
instead the cutting tools have in counterclockwise
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Chinese Spindles
By Ricardoco in forum Generic Chinese SpindlesReplies: 123Last Post: 05-12-2016, 12:16 AM -
BUILD LOG: From Chinese to Taffynese
By Carlb1058 in forum DIY Mill Build LogsReplies: 6Last Post: 09-07-2013, 12:03 AM -
WANTED: 2.2 KW Chinese Spindle
By Chaz in forum Items WantedReplies: 2Last Post: 17-06-2013, 10:03 AM -
Chinese spindles
By Colin Barron in forum Marketplace DiscussionReplies: 15Last Post: 23-08-2011, 08:58 PM -
Chinese 1.5kw Spindles
By jcb121 in forum Generic Chinese SpindlesReplies: 12Last Post: 28-07-2011, 06:20 PM
Bookmarks