Chinese 3040T Arrives

[cimi]

My is 3040T and the spindle is a ER-11

[EddyCurrent]

how to reverse the rotation of the spindle?

Why would you want that ?, the collet nut is designed to rotate forwards, i.e. it is trying to tighten all the time.

[cimi]

For my tools...

because the blades of the tool are down...

They cut in opposite side..

[EddyCurrent]

I've not seen those, all I've seen are 'up spiral' and 'down spiral' cutters but they all rotate in the forward direction.

http://www.trend-uk.com/en/UK/trend/...ledge&id=15884

[cimi]

my turn in the clockwise direction.... it is right that there has to turn in that direction??

thanks for the reply me man...

[EddyCurrent]

Looking down on the machine all cutters should turn in the clockwise direction, same direction as a drill would. The up and down spirals are in opposite direction but they both cut in the clockwise direction.
Did you look at the link above to trend-uk.com ?

[cimi]

then I bay something wrong... :(

[JAZZCNC]

my turn in the clockwise direction.... it is right that there has to turn in that direction??

thanks for the reply me man...

Ok so lets first determine which way your spindle is actualy spinning.? It should be spinning in the clockwise direction does it.?

Can you show the cutters.?

[cimi]

clockwise direction....

[cimi]

instead the cutting tools have in counterclockwise