Hi,
I'll be wanting to make light engravings on a flat wooden board about 30x30cm in size with a depth of under 20mm.
The detailing I'm wanting to CNC is text or simple decoration, at about a depth of 0.5 mm deep, and then staining it.
I have basically assumed birch plywood is the way to go, I know cheap plywood can be poor, I've found HPC laser plywood, probably the 6mm deep stuff which seems to be well received without warping etc- it's very important to me that the boards are pretty flat.
Is this the best option for me?
Thanks,
Mark.