Plastic injection mold making forum?

[JRR]

Ok guys its done, the new sub forum can be found under Materials > Mould Making & Design

I've populated it with all the threads i could find related to plastic injection and mould making, if you find any that need moving please let me know.

Enjoy :)

.Me

Well, I did find the above link doesn't work, but the section appears to have ended up under Machines > Moulding Machines

[dannyb]

Hi There just reading the posts on injection moulding and I have some old Austin Allen vertical or split line moulding machine . It has not been used for nearly twenty years but occasionally start the motor and operate the hydraulics to check it still works . I have the original manual and some tools.
It has a 12 ton clamping force and is in good condition may need some heater bands . I also have a small single phase granulator and would be willing to sell both for 1500 euro I am in ireland

[scooterist007]

I know this is a old thread, but have you guy's looked at precious plastic? It's an open source project for plastic recycling, the guy that started is a Dutch guy and has produced a shredder, a extruder, a injection machine and a compression machine, you can download the plans for each machine and there is a YouTube build up, the website is https://preciousplastic.com/en/
I don't know if this what your after.

Sent from my EVA-L09 using Tapatalk

[dannyb]

Hi scooterist 007 thanks for that

[scooterist007]

No probs mate, I found it interesting when I found the site, problem is that is more machines I have to build!

Sent from my EVA-L09 using Tapatalk

[Edmo117]

Hi out there in cyberspace

I used to have several moulding machines - small ones made by Austin-Allen and were single phase. OK for small parts. I sold the machines many years ago but now find that I need some moulding made using the tooling I made for the Austin-Allen machines.
If there is anyone out there who has any Austin-Allen machines and would like to make a few bob doing some moulding, please get in touch. I can promise you will be glad you did.

Cheers

[3DCompare]

Hi,

We can help you Injection Mold any product - message if interested!

We can also create the CAD files in-house with our team of engineers & product designers.