Page 2 of 2 FirstFirst 12
  1. #11
    It was the B.O.B at fault.

    ordered a new one, which received today from ZAP's lightening service.

    works first time, no messing about.

    in many ways im glad. because ive concluded what the problem is, Its also reassured me that the settings were right in mach and im not losing my mind.

    But, it does mean Im going to have to remove the electronics & computer every time I leave the machine... as its clearly too cold and damp where the machine is to keep them.

    Unless I mount them all inside a wooden insulated box, with a greenhouse heater etc

    thankyou all for your help. especially those of you who have been pm'ing, skyping, and via answering the phone to me!!
    Last edited by kingcreaky; 22-01-2014 at 05:36 PM.

  2. #12
    Quote Originally Posted by kingcreaky View Post
    It was the B.O.B at fault.

    ordered a new one, which received today from ZAP's lightening service.

    works first time, no messing about.

    in many ways im glad. because ive concluded what the problem is, Its also reassured me that the settings were right in mach and im not losing my mind.

    But, it does mean Im going to have to remove the electronics & computer every time I leave the machine... as its clearly too cold and damp where the machine is to keep them.

    Unless I mount them all inside a wooden insulated box, with a greenhouse heater etc

    thankyou all for your help. especially those of you who have been pm'ing, skyping, and via answering the phone to me!!
    Bugger and I've just sent the SS and BOB.!!. . . . Just return when they arrive please.

  3. #13
    Don't bin the breakout board you were using. I'll have a go at fixing it for you.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. RFQ: I am looking for work as cnc operator.
    By krystiankania in forum Projects, Jobs & Requests
    Replies: 0
    Last Post: 13-02-2014, 03:48 PM
  2. Poorly siemens inverter, wont switch on.
    By jonisonvespa in forum Spindles & Drive Motors
    Replies: 7
    Last Post: 06-12-2012, 04:45 PM
  3. Work in Norway
    By Protech HR in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 11-09-2012, 10:12 AM
  4. WANTED: Frame work
    By D-man in forum Items Wanted
    Replies: 3
    Last Post: 30-12-2011, 09:03 PM
  5. NEW MEMBER: Back to work!
    By Edge in forum New Member Introductions
    Replies: 4
    Last Post: 19-08-2010, 11:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •