. .
  1. #1
    Hi,
    for sale is used Galil DMC-1880 PCI motion controller. Works with mach3 via a plugin. Comes with 2 long 100 pin cables for the breakout boards.

    I accidentally bought 2, so one has to go. 550euro shipped to your door worldwide. They sell for quite much more at ebay.

    To run it on a machine you will need for 4 axis - 1 DMC-1900 or DMC-2900 breakout boards. On ebay at around 100 euro each. Or 2 of them for more than 4 axis.

    Right now they sell at ebay some Galil AMP-19540 for 120eur, which can be used instead of the breakout boards and each of it can drive 4x500w servo motors. So quite cheaply can be formed a great setup.

    Or simply the cables can be cut at the side of the enclosure and fashioned a cheap termination board, as most of the signals are opto isolated in the controller

    I tested it as far as i could and updated to latest firmware. There is quite extensive manual at the Galil web how to use the controller.

    Click image for larger version. 

Name:	upload_10000085879068_2014.01.26,16-05-59,594_0BE449DC.jpg 
Views:	344 
Size:	548.2 KB 
ID:	11378

    Click image for larger version. 

Name:	upload_10000085879068_2014.01.26,16-07-01,229_7D897E06.jpg 
Views:	323 
Size:	371.6 KB 
ID:	11379

    PS. I have also the DMC -2183, which is the same but ethernet controller. It comes with 2 I/O boards and plugs. The same price. So if you need lan motion board i can keep the 1880.
    Last edited by Boyan Silyavski; 26-01-2014 at 05:46 PM.

  2. #2
    Just send it to ebay. No interest? I can lower a bit the price. Come on, its a steal

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FOR SALE: Galil Motion Controller - PCI DMC 1842 - four axes
    By lateAtNight in forum Items For Sale
    Replies: 1
    Last Post: 24-06-2014, 03:41 PM
  2. Advice please! JAF Motion Controller issues!
    By Mark Chard in forum Machine Control Software
    Replies: 0
    Last Post: 31-01-2014, 05:03 PM
  3. eBay: Galil DMC-1580 Motion Controller 8-Axis
    By Boyan Silyavski in forum Items On eBay UK
    Replies: 1
    Last Post: 25-12-2013, 10:30 AM
  4. USB and Ethernet Mach3 motion controller PLCM-E3
    By Purelogic R&D in forum Manufacturer News
    Replies: 39
    Last Post: 29-12-2012, 09:38 AM
  5. Purelogic Tiny Mach3 USB motion controller PLCM-LPT2
    By Purelogic R&D in forum Manufacturer News
    Replies: 5
    Last Post: 21-08-2012, 08:22 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •