Page 2 of 2 FirstFirst 12
  1. #11
    FIXED!

    There was a little post i found on a google search.

    There is a tick box - "Max CL Mode Enabled", this was checked, unchecking solved the issue :)


    Happy days, thanks for the help.

  2. #12
    Good to hear you've got it working.


    - Nick
    Last edited by magicniner; 30-01-2014 at 10:09 AM.

  3. #13
    Check the LPT port in the computer Bios. Make sure it is enabled and set to bi-directional if that setting is available, else use ECP or EPP.

  4. #14
    Yes, the port is set as Ecp/Epp in bios.

    all working now.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. tree problems!
    By kingcreaky in forum Woodwork Discussion
    Replies: 8
    Last Post: 02-06-2014, 12:35 PM
  2. F-Engrave problems
    By cropwell in forum CAD & CAM Software
    Replies: 29
    Last Post: 29-06-2013, 03:48 PM
  3. problems since update
    By motoxy in forum General Discussion
    Replies: 6
    Last Post: 02-11-2012, 06:14 PM
  4. NEW MEMBER: MDF Problems
    By MrWiz73 in forum New Member Introductions
    Replies: 4
    Last Post: 31-12-2011, 12:39 AM
  5. homing problems in mach3
    By johngoodrich in forum Artsoft Mach
    Replies: 2
    Last Post: 17-09-2011, 08:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •