. .
  1. #1
    Afternoon,

    I have the following items I have collected with a view to building a CNC project which I would like to dispose of.

    2No Berger Lahr VRDM3910/50LVBOO - tested working
    2No Berger Lahr WD3-004.0801 - tested working
    2No Berger Lahr SER397/4L3SS0TO - untested
    2No Mitsubishi MR-J2S-40A - untested
    2No HC-MFS43 - untested

    Plus a bunch of related cabling. I would like £500 firm for all of this, as a job lot. I am in N Kent but could deliver it to N Kent, S Essex or East/central London within reason, or you could collect.

    Thanks for looking,

    Pete.

  2. #2
    If you guarantee me they all work then I'm interested at the money you want but not if any are untested.

  3. #3
    Hi Jazzcnc.

    All of this stuff has been pulled from working machines and well-handled, though it wasn't me that pulled them.

    The top two pairs I have powered and controlled with mach3, through a range of steps up to the max of 10k steps/rev.
    The middle motors I have no way (or knowledge of how) to test, no canbus controller.
    The bottom two pairs are matched together drive/servo units so I could power them for testing but I might need my hand held as to how.

    Pete.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. switching from steppers to servos - STEP / DIR control
    By dsc in forum Stepper & Servo Motors
    Replies: 6
    Last Post: 18-06-2014, 12:41 PM
  2. Drives without steppers
    By Wobblycogs in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 27-03-2014, 01:07 PM
  3. FOR SALE: Steppers (3), Drives (3), Breakout board and 500w 48v PSU
    By deannos in forum Items For Sale
    Replies: 13
    Last Post: 11-10-2012, 10:44 AM
  4. FOR SALE: Steppers (3), Drives (3), Breakout board and 500w 48v PSU
    By carl0s in forum Items For Sale
    Replies: 6
    Last Post: 30-05-2011, 01:03 AM
  5. Mariss Freimanis Steppers vs Servos Advantages/Disadvantages of both
    By Lee Roberts in forum Stepper & Servo Motors
    Replies: 0
    Last Post: 02-10-2007, 09:08 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •