Once upon a time I thought I had the drive system worked out.i had intended Using stepper Motors.

Then one of my friends said why not use servos you can get a faster working speed.
machine bed is 2635mm long and 1220 wide.
so after some calculations came up with two 400 watt to position the R&P x
one to position the Y and one to position the Z. which is above the calculations of 2 x 230 watt for the X
I wish to run the machine faster than 7.2 metres per minute.

Ive looked at loads of profi Machines they are R&P 90% run on steppers. Usually somewhere about 12NM.

After endless searching on the NET for suppliers in the UK I am finding the choice very difficult and of course,
Know very little about servo Drives.

Could someone explain what a multiaxis drive is and can I use one to drive 4 motors on 3 axis.
and are there any other suppliers in the UK that sell larger servo motors than Remote control Aeroplanes.
the only one ive come across is ZAPP