1. #1
    Dear all,

    I may ring Denford but I thought I would ask on here to see if anyone has hadsome firsthand experience.

    I have a Denford Triac and am looking to buy some vices for it. I would like to have one big vice for holding a single job and two or preferably three for holding small parts that I would fit to a plate and mount the plate to the table. My concerns are I do not know what the table can take weight wise without overloading the machine. I have found the following size precision vices that are sized and weigh as follows:

    W80mm Opening jaw 100mm Overall length 200mm weighs 5.6kg
    W100mm Opening jaw 125mm Overall length 245mm weighs 10kg

    They seem very heavy for a small table I guess if I was to use a large vice Icould run it the length of the table say so the moving jaw is to the right.

    Any help here will be great, many thanks in advance

    Suesi
    Last edited by suesi34e; 21-02-2014 at 11:06 AM.

  2. #2
    are these any good?scroll down to type 1 and 2
    Super X3 Milling Vices - Arc Euro Trade
    Last edited by deisel; 21-02-2014 at 08:41 PM.

  3. The Following User Says Thank You to deisel For This Useful Post:


  4. #3
    Hi deisel

    Thank you for taking the time to give this some thought and you help. The linktakes you to the vices I was thinking of and that the weights I mention referto that being the Type 1 vices. My problem is if I was to have two or three onthe table with a piece of plate that has to be 13 to 18 kg before I even thinkof jobs in the vices and that seem a lot but I just do not know really. Ishould have mentioned the vices that I was thinking of! To re-cap it are thetype 1 vices from Arc Euro Trade.

    Many thanks

    suesi


  5. #4
    it might be worth talking to the lad in this thread its only 3 posts long he,s from the uk hes using a triac like yourself and seems to be useing one of those vices from arc and the likes,
    i dont own a denford so cant help ;)
    Build Thread Machined and Iphone5

  6. #5
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Current Activity: Viewing Has been a member for 9-10 years. Has a total post count of 1,831. Received thanks 192 times, giving thanks to others 5 times.
    Probably worth asking over on the Denford forum - Denford Software & Machines • Index page

  7. #6
    Hi deisel,
    I have had a look at that link very good work he does, I will contact him Ithink thanks very much for the heads up on that. It was very observant of youto spot the link / machine he was using so quickly after I made the post.
    Appreciate your time looking out for what would interest me.
    All the best
    Steve


  8. #7
    Hi deisel,
    I have had a look at that link very good work he does, I will contact him Ithink thanks very much for the heads up on that. It was very observant of youto spot the link / machine he was using so quickly after I made the post.
    Appreciate your time looking out for what would interest me.
    All the best
    Steve

  9. #8
    Hi m_c

    I think I will ask Denford sound a good idea to me! Thanks for your reply to my post

    Suesi

Similar Threads

  1. FOR SALE: Denford Triac PC for sale
    By i2i in forum Items For Sale
    Replies: 3
    Last Post: 12-01-2017, 10:02 AM
  2. FOR SALE: Denford Triac PC for sale
    By i2i in forum Items For Sale
    Replies: 13
    Last Post: 12-01-2017, 10:01 AM
  3. Denford Triac VMC
    By fidia in forum Milling Machines, Builds & Conversions
    Replies: 6
    Last Post: 19-08-2016, 08:18 AM
  4. FOR SALE: Denford Triac
    By asto in forum Items For Sale
    Replies: 19
    Last Post: 07-02-2016, 08:28 PM
  5. WANTED: Denford Triac
    By edwardsjc in forum Items Wanted
    Replies: 13
    Last Post: 20-08-2012, 08:17 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •