Thread: Hi, from sunny Manchester...
Just (finally) got my micro CNC router up and useful. It's a used Zen 7x7, as per their spec.
I've had a big learning curve, as even though I've got a lot of commercial/manufacturing experience with CNC, a 400 tonne machine is just a bit different...
I've found that although Mach 3 is great value software, it's big. Bloody big (to learn/configure), but now, 'alle ist gut'
To the extent that I have just finished putting holes into some ally arms for my quad. It was great just to zero everything up, clamp the section down, and drill accurately, whilst consuming a quick tab!
Having trouble figuring out the relay switch on my PRC driver board (TB6560 blue 3-axis), it might have blown...
If anyone is playing in Manchester, or wants help, feel free to PM me.
Cheers, all, TTFN.
NEW MEMBER: Hey from manchesterBy craigrobbo in forum New Member IntroductionsReplies: 1Last Post: 01-05-2012, 05:38 PM
NEW MEMBER: Hello from ManchesterBy Pro Mod in forum New Member IntroductionsReplies: 3Last Post: 01-05-2012, 05:33 PM
NEW MEMBER: Hello from Manchester!By Dopy in forum New Member IntroductionsReplies: 1Last Post: 19-10-2010, 12:24 AM
NEW MEMBER: Hello from ManchesterBy electricwizard in forum New Member IntroductionsReplies: 4Last Post: 26-08-2010, 01:08 PM
NEW MEMBER: Hi from Manchester (ish)By the_mole_763682 in forum New Member IntroductionsReplies: 2Last Post: 10-06-2010, 11:39 PM