Does anyone have a drawing / sketch of the PMDX-126 with pins and labels.
I'm reading the documentation and there is nothing I can use.
Last edited by GTJim; 04-03-2014 at 08:05 AM.
Thanks for the link, but there's not a layout of the board. I was hoping to import it into a schematic or draw over a picture.
http://www.mycncuk.com/forums/genera...html#post51919 is this any good, it's from Graham (Wobblycogs) thread...Neil...
The Following User Says Thank You to njhussey For This Useful Post: