. .
  1. #1
    Hi to all.

    Looking at the site for the first time and it seems that the right thing to do is to introduce my self to the community at large. So here we go!!!

    Name's Phil and I have been making Native American Style Flutes for the past 6 years and have a strong interest in anything wood. Decided to purchase a small worktop router in November last year and found a good deal in China and got a FLDG6090 Mini CNC Router with a NK105 controller. It arrived safe and sound in December where it got a position in my workshop where it stayed until last week when I finally had time to have a play. I also purchased Artcams Insignia 2013 from Delcam and had as part of the deal got a days training here at home. I would recommend doing this to anyone as it really helped in getting around the software.

    Being new to CNC Routing I would like to have a mentor that I can discuss problems with and if necessary have a visit to give hands on help.

    Well there you go, introduction over.
    Last edited by Phillou; 14-03-2014 at 10:59 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2D software for newbe
    By dudz in forum Computer Software
    Replies: 42
    Last Post: 12-11-2012, 10:25 AM
  2. NEW MEMBER: Newbe
    By THE PHOENIX in forum New Member Introductions
    Replies: 2
    Last Post: 03-12-2010, 07:20 PM
  3. NEW MEMBER: Hi from newbe
    By croy in forum New Member Introductions
    Replies: 2
    Last Post: 28-01-2010, 09:22 PM
  4. PIC Advice For A Newbe
    By Mad Professor in forum Electronic Project Building
    Replies: 20
    Last Post: 06-12-2009, 10:14 AM
  5. NEW MEMBER: Newbe
    By cncezee in forum New Member Introductions
    Replies: 3
    Last Post: 29-08-2009, 07:40 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •