Hello everyone,

After working with CNC machining centres and grinders for most of my adult life I've decided to include my mid life crisis with work and build a home CNC.
Purchased the following from Ebay :-

Nema 34 1090oz motors, PSU's and drives
RM1605 1350mm X and Z, 300mm Z.
16mm linear bar rails and blocks
2.2kW water cooled spindle and VFD with ER20 toolholding.

Going to use 40mm box section for frame - going to get help from fitters in work who are excellent welders, so hoping to keep distortion to a minimum. Going for centre take off Y axis - single leadscrew, mounted underneath the table.

Kicking off tomorrow so will keep all posted on progress.