1. #1
    Hi,
    Just finished building my cnc machine and have fitted a bosch gkf 600 router which is 1/4" . Does anybody know where I can get a 1/8" collet to fit and also best place to buy bits. I will predominately using it to cut wood and msg.

  2. #2
    This is the best I could find, collet sleeves, there's a 3.2 to 6.35mm one that should do your job

    http://www.trend-uk.com/en/UK/trend/...=collet+sleeve
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  3. #3
    Quote Originally Posted by EddyCurrent View Post
    This is the best I could find, collet sleeves, there's a 3.2 to 6.35mm one that should do your job

    http://www.trend-uk.com/en/UK/trend/...=collet+sleeve
    I've just orderered one. I'll give it a go. Just waiting to get my computer back from repair shop and ill try them out. Thanks for link.

  4. #4
    http://www.ebay.co.uk/itm/330966499288 there you go 1/4" to 1/8" or 6.35mm to 3.175mm in new money LOL
    Mike

  5. #5
    Nice one thanks. Longy.

  6. #6
    gedereco your welcome mate, I had them in my watch list but have got some 1/8 collets now and never removed the watch just in case.
    Mike

  7. #7
    I was looking at the 1/8" cnc bits from China for cutting wood/mdf, anyone tried these. 5 for a 10 I guess worth a try.

  8. #8
    There's these too 10 for a tenner, and same seller has others

    http://www.amazon.co.uk/Flutes-Carbi...=ball+end+mill
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  9. The Following User Says Thank You to EddyCurrent For This Useful Post:


  10. #9
    Thanks for that eddy. I'll try them.

Similar Threads

  1. best router bits ?
    By totally useless in forum General Discussion
    Replies: 7
    Last Post: 01-05-2015, 11:53 AM
  2. Replies: 0
    Last Post: 12-11-2013, 09:31 PM
  3. 3.175mm router bits
    By ian stenson in forum Tool & Tooling Technology
    Replies: 2
    Last Post: 13-06-2013, 07:59 AM
  4. SWAP: 6mm Carbide CNC Router Bits for 3mm's
    By Fivetide in forum Items For Swap
    Replies: 8
    Last Post: 04-12-2012, 04:47 PM
  5. CNC Router Bits
    By ploughex in forum Milling Machines, Builds & Conversions
    Replies: 4
    Last Post: 01-08-2010, 06:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •