Anyone Help

[GeoDurie]

Hi

I am looking to purchase a 2nd hand chinese built machine called a HT1212 plasma router 3D. Its presently has NCStudio can anyone help with the following. I will not be using it for 3D work mostly cut shapes out off 18mm MDF and 18mm Plywood and possible carving lettering into wood.

1- The machine working area is 1200mm x 1200mm but the bed size is 1300 x 1500 is it possible to use the full bed size.

2 - Can the NCStudio be changed to VCrave Pro and what would be required.

3 - Has anyone had experience with this machine or similar


Thanks in advance for any help :-)